Toshiba 2550c User Manual
Basic Copying Operation
1
Enlargement and reduction
copying
Press [ZOOM].
11
1
Select the desired paper size,
2
press [AMS], and then
3
[OK].
2222
Align the originals according to the desired paper
size and direction. The size of the originals will be
automatically determined.
Automatic size detection for originals on the
original glass is available only for e-STUDIO
2050C/2550C.
When copying a set of originals whose sizes and
directions are different, press [MIXED SIZE].
size and direction. The size of the originals will be
automatically determined.
Automatic size detection for originals on the
original glass is available only for e-STUDIO
2050C/2550C.
When copying a set of originals whose sizes and
directions are different, press [MIXED SIZE].
•
•
•
Selecting finishing mode
(sorting)
Press [FINISHING].
11
1
Press [SORT] and then
2
[OK].
22
To set the staple and the hole punch mode, the
optional finishing devices are needed. For the
necessary options, see the following page.
&
optional finishing devices are needed. For the
necessary options, see the following page.
&
For example, when “Original 1”, “Original 2” and
“Original 3” are copied in 2 sets, they can be made
as follows.
“Original 3” are copied in 2 sets, they can be made
as follows.
•
•
When you use the Reversing Automatic Document
Feeder, the sorting mode is automatically set.
Feeder, the sorting mode is automatically set.
2
3
1
2
1
2
3
3
1
2
3
1
2
3
1
2
3
1
2
3
1
1
2
Sort
Group