Toshiba 2551c User Manual

Use this to hold the original on the original glass to scan it.
&

Use this to copy three-dimensional originals, book-type 
originals and special paper such as OHP film or tracing 
paper, as well as plain paper.

Use this to set and operate various types of functions such 
as copying, scanning and faxing. This also displays 
messages, such as when paper runs out or paper misfeeds 
occur.
&

Use this to set and operate various types of functions such 
as copying and faxing.
&

When toner runs out, the message appears on the touch 
panel. Replace the cartridge following the procedure 
below.
&

When “Dispose of used toner” appears on the touch panel, 
replace the waste toner box according to the following 
procedures.
&

If unevenness occurs on the copied or printed paper, clean 
the main chargers according to the following procedures.
&

 P.43 "Cleaning the main chargers and LED print heads" 

If unevenness occurs on the copied or printed paper, clean 
the LED print head according to the following procedures.
&

 P.43 "Cleaning the main chargers and LED print heads" 

Printed paper exits into this tray.

Use this to prevent the exiting paper from falling. Open 
this when you make many copies or prints on a larger size 
of paper such as A3, B4, LD and LG.

The data of originals transported from the Reversing 
Automatic Document Feeder are scanned here.
&

 P.42 “Regular Cleaning” in this manual

Use this to check the size of an original placed on the 
original glass.

Open this cover when you replace the toner cartridge and 
clean the charger.

Use this switch to turn the power of the equipment ON or 
OFF.
&

This orange lamp lights when a paper misfeed has 
occurred in the Reversing Automatic Document Feeder.

This blue lamp lights when the originals are placed on the 
original feeder tray. It also blinks while the originals are 
being scanned.