Toshiba 2830C User Manual

Printing from an Application    127

‰

The paper source can also be selected using the media type using the following option.

In PostScript Deferred Media Selection is always turned on so the paper size has priority over the media type and the 
paper source.
In PCL5e the paper size always has priority over the media type and the paper source.
If this option is not specified, the default value will be used.
Example: The command to specify Thick1 media type is “lp -o mtype=Thick1 filename”.

‰

The paper source can be selected using the following options.

In PostScript Deferred Media Selection is always turned on so the paper size has priority over the paper source. In PCL5e 
the paper size always has priority over the paper source.
If this option is not specified the command will not be sent so the printer’s default value will be used.
Example: The command to specify the LCF paper source is “lp - o lcf filename”.

‰

The current duplex mode can be specified using the following options.

If this option is not specified, the default value “simplex” will be used.
It is not necessary to specify duplexing for Booklet Mode (sduplex). Setting duplexing separately can override the booklet 
mode setting for duplexing.
Example: The command to specify long edge duplexing is “lp -o duplex filename”.

mtype=Plain

The paper source that contains Plain paper is 
requested.

mtype=
Transparency

The paper source that contains transparency slides is 
requested.

mtype=Thick1

The paper source that contains Thick1 paper is 
requested.

mtype=Thick2

The paper source that contains Thick2 paper is 
requested.

mtype=Thick3

The paper source that contains Thick3 paper is 
requested.

auto-source

Select auto paper tray selection.

manual

Select Bypass Tray.

drawer1

upper
cas1

Select the 1st drawer.

drawer2

lower
cas2

Select the 2nd drawer.

drawer3

pedupper
cas3

Select the 3rd drawer.

drawer4

pedlower
cas4

Select the 4th drawer.

LCF

lcf

Select the LCF.  LCF is not available for some countries 
or regions.

simplex

Turn duplexing off.

duplex

lduplex
duplex_long
duplex=long
hduplex

Turn duplexing on with long edge binding.

sduplex

duplex_short
duplex=short
vduplex

Turn duplexing on with short edge binding.