Toshiba 2830C User Manual

154    Monitoring the Print Job Status

„

USB Direct Printing refers to the feature of printing files saved in a USB storage device that is connected to the USB port 
on the equipment. With this feature, you can print PDF, encrypted PDF (file extension: “.pdf”), XPS (file extension: “.xps”), 
JPEG (file extension: “.jpg” or “.jpeg”), PRN (file extension: “.prn”), and PS (file extension: “.ps”) files.

y

USB Direct Printing requires the USB Direct Print setting to be enabled on TopAccess. For details, refer to the 
TopAccess Guide.

y

You cannot specify which page(s) to print. All pages are to be printed.

y

PDF file versions 1.3 to 1.7 are supported.

y

With this feature, the equipment can print encrypted PDF files whose encryption level is either “40-bit RC4” or “128-
bit RC4.”

y

The feature does not support encrypted PDF files whose encryption level is [128bit AES], and some files of other 
encryption levels may not be printable, either. In this case, print these files from a client computer.

y

For printing the PRN files, the page description languages supported by USB Direct Printing are PostScript (PS3), 
Printer Command Language (PCL5e and PCL6), and XML Paper Specification (XPS).

y

Do not turn on the equipment when a USB storage device is connected to the port.

y

The USB storage device should meet the following requirements:

- FAT16 and FAT32 formats
- Single-partition (USB media with multiple partitions are not supported.)
- Memory capacity: 2GB maximum

In a few seconds, “FOUND USB DEVICE” appears at the lower left of 
the screen.

Do not disconnect the USB storage device when “USB DEVICE in 
use Do not remove USB DEVICE” is displayed on the screen. 
Removing the device while the message is displayed could destroy 
the data in the device or cause a malfunction of the equipment.

y

If the equipment is managed by the department management 
codes, proceed to Step 3.

y

If the equipment is not managed by the department codes, proceed 
to Step 5.