Epson S50670 User Manual
Basic Operations
111
*1 The value selected for Side Margin(Left) in the setup menu. The default value is 5 mm (0.2 inch). Choose
a Side Margin(Left) over 10 mm (0.4 inch) when using media holding plates.
*2 The total of the values selected for Print Start Position and Side Margin(Right) in the setup menu. The
default value is 5 mm (0.2 inch). Choose a Print Start Position or Side Margin(Right) over 10 mm (0.4
inch) when using media holding plates.
inch) when using media holding plates.
1 (right edge of media)
Varies with the option selected for Media Size Check.
On selected for Media Size Check: The right edge of the media.
Off selected for Media Size Check: The default right edge position (as far as the platen past the
center of the label on the pre-heater).
center of the label on the pre-heater).
2 (left edge of media)
Varies with the option selected for Media Size Check.
On selected for Media Size Check: The left edge of the media.
Off selected for Media Size Check: 64 inches from the default right edge.
Note:
The margins may not conform to the values selected in the document (or application). If the
value selected for Side Margin or Print Start Position is changed, documents that fill the printable
area will not be printed to the full width of the media.
The margins may not conform to the values selected in the document (or application). If the
value selected for Side Margin or Print Start Position is changed, documents that fill the printable
area will not be printed to the full width of the media.
A
B
300–1625 mm
(11.8–64 in.)
(11.8–64 in.)
3–25 mm
(0.1–1 in.)
(0.1–1 in.)
1
3–825 mm
(0.1–32.5 in.)
(0.1–32.5 in.)
2
5 mm (0.2 in.)
5 mm (0.2 in.)