Epson S50670 User Manual

❏ Do not bend or tug the waste ink tube. Ink could spill inside or around the printer.

❏ The following components require regular maintenance at recommended intervals or 

according to the frequency with which the printer is used. Failure to perform regular 
maintenance could result in loss of print quality. In the absence of the appropriate 
maintenance, continued use could damage the print head.

❏ The print head may not be capped (the print head may not return to the right side) if the 

printer is turned off when the media is jammed or an error has occurred. Capping is a 
function for automatically covering the print head with a cap (lid) to prevent the print 
head from drying out. In this case, turn on the power and wait until capping is performed 
automatically.

❏ When the power is on, do not remove the power plug or cut the power at the breaker. 

The print head may not be capped properly. In this case, turn on the power and wait 
until capping is performed automatically.

❏ The print head is automatically cleaned at a fixed interval after printing to keep the 

nozzle from clogging.

Be sure that the waste ink bottle is installed whenever the printer is on. 

❏ As well as being expended during printing, ink is used during head cleaning and other 

maintenance required to keep the print head in working order.

Print head

Once a week

When colors in the printout are faint or missing even after head has been 
cleaned.

Wiper

Caps

Wiper rail

Flushing pad

Once every six months (or more often, depending on usage)

Wiper cleaner

Wiper