DELL 1355cn User Manual
56
Setting the IP Address
1 Click Start
All Programs
Dell Printers
Dell 1355 Multifunction
Color Printer
Tool Box.
NOTE:
The Select Printer dialog box opens in this step, when multiple printer
drivers are installed on your computer. In this case, click the name of Dell 1355
Multifunction Color Printer listed in Printer Name, and then click OK.
The Tool Box opens.
2 Click the Printer Maintenance tab.
3 Select TCP/IP Settings from the list at the left side of the page.
3 Select TCP/IP Settings from the list at the left side of the page.
The
TCP/IP Settings page is displayed.
4 Select the mode from IP Address Mode, and then enter the values in IP
Address,
Subnet Mask, and Gateway Address.
5 Press the Apply New Settings button to take effect.
The IP address is assigned to your printer. To verify the setting, open the web
browser on any computer connected to the network and enter the IP address
into the address bar on the browser. If the IP address is set up correctly, the
Dell Printer Configuration Web Tool displays in your browser.
You can also assign the IP address to the printer when installing the printer
You can also assign the IP address to the printer when installing the printer
drivers with installer. When you use the Network Installation feature, and the
Get IP Address is set to AutoIP on the operator panel menu, you can
Get IP Address is set to AutoIP on the operator panel menu, you can
set the IP address from 0.0.0.0 to the desired IP address on the printer
selection window.
Verifying the IP Settings
1 Print the printer settings page.
2 Look under the TCP/IP heading on the printer settings page to ensure
that the IP address, subnet mask, and gateway are appropriate.
To verify if the printer is active on the network, run the ping command in
your computer:
1 Click Start, and select Run.
2 Type cmd, and then press OK.
2 Type cmd, and then press OK.
A black window is displayed.