DELL P513w User Manual
6
Press the arrow buttons to select the resolution quality and the original image size. Press
each time you make
a selection.
7
Press
to start scanning.
The scan is complete when the application you selected in step 5 opens on the destination computer, and the scan
appears within the application as a new file.
appears within the application as a new file.
Scanning to a flash drive or memory card
Before you begin, make sure your flash drive or memory card is not write protected.
1
Load an original document faceup into the ADF or facedown on the scanner glass.
2
From the printer control panel, press
.
3
Press the up or down arrow button to scroll to Memory Device.
4
Insert the flash drive or memory card, and then press
.
5
Press the arrow buttons to select the resolution quality, the output file type you want to create, and the original
image size. Press
image size. Press
each time you make a selection.
Note: Select the PDF file type if you want to scan multiple pages and save them as one file.
6
Press
to start scanning.
The scan is complete when a message appears on the printer control panel indicating that the file you scanned has
been saved.
been saved.
Scanning photos into an editing application
Using the printer control panel
1
Load the photo or photos facedown on the scanner glass.
2
From the printer control panel, press
.
3
Press the left or right arrow button to scroll to USB or the name of the network computer to receive the scan, and
then press
.
The local or network computer is the destination that will receive the scan.
Notes:
•
You may be prompted to enter a PIN if the computer requires it. Enter the PIN using the keypad.
•
To assign a computer name and a PIN to the computer, see the Help for the printer software associated with
your operating system.
your operating system.
4
Wait until the printer has finished downloading the list of scan applications available on the selected computer.
5
Press the left or right arrow button to select a photo editing application, and then press
.
6
Press the arrow buttons to select the resolution quality, the type of output you want to create, and the original
image size. Press
image size. Press
each time you make a selection.
7
Press
to start scanning.
Scanning
48