Brother 9200C Owner's Manual

W A L K - U P   P H O T O C A P T U R E   C E N T E R ™      

Press 

, 

, 

.

Press

 

 or 

 

to select RED, 

GREEN or BLUE and press 

. 

Press

  

or  

to adjust the degree of 

color and press 

.

Return to Step 2 to select the next 
color—OR—Press 

 to exit.

Press 

, 

, 

.

Press

 

 or 

 

to select WHITE BALANCE and press 

. 

To skip White Balance, press 

 to select SHARPNESS or COLOR DENSITY.

Press

 

 or 

 

to adjust the degree of White Balance and press 

.

Repeat Step 2 and Step 3 to adjust the degree of Sharpness and Color Density
—OR—Press 

 to exit.

■

This setting adjusts the hue of the white sections of an image.  Lighting, camera 
settings and other influences will effect the appearance of white.  The white 
parts of a picture may appear to be slightly pink, yellow or some other color.  By 
using this adjustment you can correct this effect and bring the white sections 
back to pure white.

■

This setting enhances the detail of an image.  It is similar to adjusting the fine 
focus on a camera.  If the focus is off a small amount, you can not clearly see 
the fine details of an image.

■

This setting adjusts the total amount of color in the image. You can increase or 
decrease the amount of color in an image to improve a picture that may appear 
washed out or weak.

Once you are familiar with the types of errors that might occur while you’re 
using the PhotoCapture Center

™

, you can easily identify and troubleshoot 

difficulties. When an error message appears on the LCD, the MFC will beep to 
get your attention.

MEDIA ERROR—This message appears when you insert a media card that is 
either bad or not formatted, or if there is a problem with the media drive. To 
clear this error, remove the media card.

R

: –                  +

Light

Dark

B

: –                  +

G

: –                  +