Canon 2830 User Manual

 

Supply a suitable table, cabinet, or desk for the machine. See Chapter 9, 
"Appendix," in the Reference Guide for specific dimensions and weight.

1. A single telephone line (touch-tone or rotary) should be used. (Touch-tone is 

recommended if available in your area.)

2. Order a CA11A modular jack which should be installed by the telephone 

company. If the CA11A jack is not present, installation cannot occur.

3. Order a normal business line from your telephone company's business 

representative. The line should be a regular voice grade line or an equivalent 
one. Use one line per unit.

DDD (Direct Distance Dial) line

or

IDDD (International Direct Distance Dial) line if you communicate overseas

NOTE

 

Canon recommends an individual line following industry standards, such as 2500 
(touch-tone) or 500 (rotary/pulse dial) telephones. A dedicated extension off a PBX 
(Private Branch Exchange) unit without "Call Waiting" can be used with your facsimile 
unit. Key telephone systems are not recommended because they send nonstandard 
signals to individual telephones for ringing and special codes, which may cause a 
facsimile error.

The power outlet should be a three-prong grounded receptacle (Single or Duplex). 
It should be independent from copiers, heaters, air conditioners, or any electric 
equipment that is thermostatically controlled. The rated value is 115 volts and 15 
amperes. The CA11A modular jack should be relatively close to the power outlet to 
facilitate installation.