Canon 2830 User Manual
Error Messages
8-7
8
T
rou
b
lesh
o
o
ti
ng
Error Messages
This section explains the various messages that appear on the touch panel display,
along with possible causes and remedies.
along with possible causes and remedies.
For explanations of messages that are not listed here, see the Reference Guide
and Network Guide.
and Network Guide.
Self-Diagnostic Display
Perform the necessary procedures according to the displayed self-diagnostic error
message.
message.
Self-diagnostic error messages appear on the touch panel display at the following
times:
times:
•
When scanning or printing cannot be performed because of an operational error
•
When you need to make a decision or take some action during scanning or
printing
printing
•
When you need to make a decision or take some action while browsing the
network
network
The following is a list of self-diagnostic error messages, along with their possible
causes and remedies.
causes and remedies.
Set the IP Address.
Cause
This machine is not set with an IP address.
Remedy
Specify the IP Address Settings in TCP/IP Settings in Network Settings in
System Settings (from the Additional Functions screen), and turn the machine's
main power OFF, and then back ON.
System Settings (from the Additional Functions screen), and turn the machine's
main power OFF, and then back ON.
No response from the server. Check the settings.
Cause
The specified server settings are incorrect, or the server is not turned ON.
Alternatively, the machine's TCP/IP resources may be low.
Alternatively, the machine's TCP/IP resources may be low.
Remedy
Wait for a while, and then try browsing again. If there is still no response from
the server, try selecting another server.
the server, try selecting another server.