DELL 1130N MONO LASER PRINTER User Manual

Print Media Guidelines

–

Use metal clasps, string ties, or metal folding bars

–

Have an interlocking design

–

Have postage stamps attached

–

Have nicked edges or bent corners

–

Have rough, cockle, or laid finishes

Your printer can print on many labels designed only for use with laser printers.
When selecting labels:

• Label adhesives, face sheet (printable stock), and topcoats must be able to 

withstand temperatures of 205 °C (401 °F) and pressure of 25 pounds per 

square inch (psi).

• Use labels that can be without sealing, excessive curling, wrinkling, or 

releasing hazardous emissions.

• Do not use label sheets with a slick backing material.

Before buying large quantities of any print media, it is recommended that 

you try a sample first.

When printing on labels:

• Use labels that can withstand temperatures of 205 °C (401 °F) without 

sealing, excessive curling, wrinkling, or releasing hazardous emissions.

• Set the paper type to 

Label from the printer driver.

• Do not load labels together with paper in the same tray.
• Do not print within 1 mm (0.04 inches) of the die-cut.
• Do not print within 1 mm (0.04 inches) of the edge of the label, of the 

perforations, or between die-cuts of the label.

• Do not print a label through the printer more than once.
• Portrait orientation is preferred, especially when printing bar codes.
• Do not use labels that have exposed adhesive.
• Use full label sheets. Partial sheets may cause labels to peel off during 

printing, resulting in a jam.