DELL 1130N MONO LASER PRINTER User Manual

Clearing Jams

Careful selection of appropriate print media and proper loading allow you to 

avoid paper jams. See "Print Media Guidelines" on page 155 for more 

information.

Before buying large quantities of any print media, it is recommended that 

you try a sample first.

• Use only recommended print media. See "Print Media Guidelines" on 

page 155 for more information.

• See "Loading Print Media in the Multipurpose Feeder (MPF)" on page 166 

and "Loading Print Media in the Priority Sheet Inserter (PSI)" on page 173 

to load print media properly.

• Do not overload the print media sources. Ensure that the stack print 

media height does not exceed the maximum height indicated by the line 

with an arrow on each width guide.

• Do not load wrinkled, creased, damp, or curled print media.
• Flex, fan, and straighten print media before you load it. If a jam occurs 

with print media, try feeding one sheet at a time through the MPF or the 

PSI.

• Do not use print media that you have cut or trimmed yourself.
• Do not mix print media sizes, weights, or types in the same print media 

source.

• Ensure that the recommended print side is face up when you insert the 

print media.

• Keep print media stored in an acceptable environment. For more 

• Do not remove the PSI during a print job.
• Ensure that all cables that connect to the printer are correctly attached.
• Over tightening the guides may cause jams.