DELL 1130N MONO LASER PRINTER User Manual
54
Installing Printer Drivers on Computers Running Windows
2 Select TCP/IP Settings from the list on the left side of the page.
The
TCP/IP Settings page appears.
If the IP address shows 0.0.0.0 (the factory default) or 169.254.xx.xx,
an IP address has not been assigned. To assign one for your printer, see
Disabling the firewall before installing your printer
NOTE:
For Windows XP, Service Pack 2 or 3 must be installed.
If you are running one of the following operating systems, you must disable
the firewall before installing the Dell printer software:
• Windows 7
• Windows Vista
• Windows Server 2008 R2
• Windows Server 2008
• Windows XP
• Windows Vista
• Windows Server 2008 R2
• Windows Server 2008
• Windows XP
1 Click Start
Help and Support.
NOTE:
For Windows Server 2008 R2 and Windows 7 operating systems, if you
use Online Help, switch to Offline Help on Windows Help and Support
window.
2 In the Search box, type firewall and then press Enter.
In the list, click
Turn Windows Firewall on or off and then follow the
instructions on the screen.
Enable the firewall after the installation of the Dell printer software is
Enable the firewall after the installation of the Dell printer software is
complete.
Inserting the Drivers and Utility CD
1 Insert the
Drivers and Utilities CD into your computer to start Easy Setup
Navigator.
NOTE:
If the CD does not automatically launch, click
Start
All Programs
(for Windows Vista and Windows 7)
Accessories
(for Windows Vista and
Windows 7)
Run
, and then type
D:\setup_assist.exe
(where D
is the drive letter of your CD), and then click
OK
.