Cisco Systems C9800HDTN User Manual
4
4-3
Printer Control Panel
Accessing Setup options
T
O
ACCESS
S
ETUP
WHEN
THE
F
IERY
IS
I
DLE
1.
With the printer in the ‘Ready’ state, press the
or
keys until the Admin Setup
Menu is displayed, then press the ENTER key.
2.
If an administrator password has been set up you will be prompted for it. Enter the
correct administrator password and press the ENTER key to gain access to the Setup
menus.
correct administrator password and press the ENTER key to gain access to the Setup
menus.
Press the
or
keys to choose each character of the password and press ENTER to
advance to the next character. Pressing ENTER after the last character completes
password entry.
password entry.
For first-time Setup, you must perform at least these Setups in this order:
1 – Server Setup
2 – Network Setup
3 – Printer Setup
2 – Network Setup
3 – Printer Setup
After the administrator password has been successfully entered if necessary, these and
other Setup menus can be accessed using the
other Setup menus can be accessed using the
or
keys. Press the ENTER key to
select the required menu when its name is displayed.
After performing these Setups, you can continue with the remaining Setups, or exit
Setup and save your changes.
Setup and save your changes.
About the Control Panel Setup interface
When you perform Setup from the Control Panel, you select one menu after another
using the
using the
or
keys and pressing ENTER to select the required menu. In each
menu enter information about your Fiery and your network and printing
environment.