Clarion OHM156 User Manual

32

OHM106/156

1. Turn on the ignition.

2. Turn on the DVD player.

3. Make sure there’s a DVD in the DVD player.

4. Press play on the remote control.

If the monitor does not respond:

• Check the fuses at the end of the monitor installation cables  and on the vehicle.
• Check all connections. See the installation instructions.
• Change the batteries in the remote control.
• Dirt may be covering the remote’s infrared lens. Clean the lens with a damp cloth.

In rare cases your DVD system may not function the way you expect it to. Before
calling for service, read the operating instructions for the DVD.

audio/video source: any audio and/or video device that has a composite RCA output,
such as a DVD player, game player, VCR, digital camera, etc.

Main screen: primary area of the screen for displaying output from a video source.

Sub screen: secondary area of the screen for displaying output from a video source.

OSD: on-screen display

Power supply

12V DC (10V-16V)

Test voltage

12V, negative ground

Current consumption

OHM106: 1 Amp

OHM156: 1.9 Amps

Max current consumption

OHM106: 1.1 Amps

OHM156: 2 Amps

Operating temperature

OHM106: 0 ~ 60° C

OHM156: 0 ~ 50° C

Storage temperature

OHM106: -30 ~ 85° C

OHM156: -20 ~ 60° C

Video system

Auto NTSC and PAL

Screen

OHM106: 10.2” diagonal

OHM156: 15.4” diagonal

Resolution

OHM106: 800 x 480

OHM156: 1280 x 800

Weight

OHM106: 3.8 lbs.

OHM156: 7.2 lbs.

Video signal

1Vp-p with 75-Ohm load

200mV to 8 Volts

For the sake of technical improvements, this technical data and the
design of the equipment may change without prior notice.

OHM.pmd

2006-02-28, 13:00

32