Clover Electronics TFT2284C User Manual
System Instruction Manual
52
6-8. Record
This system provides Watchdog function.
When power goes off during recording and then the power turns on, the system will automatically
start recording.
6-8.1. Manual (Continuous) recording
▫
Click the SETUP icon on the MENU bar in the LIVE mode.
▫
Click the RECORD button in the SETUP menu and the RECORD window will be displayed.
▫
Select the MANUAL RECORDING (
)
between the MANUAL RECORDING (
)
and the TIMER RECORDING (
) as shown in
[Fig.6-23]
. All channels can be set at the
same time by clicking the ALL (
) or each of the channels can be set by clicking
the MANUAL RECORDING (
) on the CAM 1 through CAM 8.
The
MOTION
(
) and SENSOR (
) as shown
in [Fig.6-23]
should be turned OFF
in this recording mode.
▫
Press the RECORD button on the remote controller or click the RECORD icon on the
MENU bar.
6-8.2. Manual Event Recording
▫
Click the SETUP icon on the MENU bar in the LIVE mode.
▫
Click the RECORD button in the SETUP menu and the RECORD window will be displayed.
▫
Select the MANUAL RECORDING (
)
between the MANUAL RECORDING (
)
and the TIMER RECORDING (
) as shown in
[Fig.6-24]
. All channels can be set at the
same time by clicking the ALL (
) or each of the channels can be set by clicking
the MANUAL RECORDING (
) on the CAM 1 through CAM 8.
[Fig.6-23. Manual Recording setup]