DAXTEN 8I User Manual

 

When the SCOUTutp system is password protected, the Control software behaves in exactly the same 
way as the OSD. You must type in the required password to access the Control software. The access 
you gain depends on the security status –.  
To change the security access, close and reopen the Control software, and type in the different 
passwords. 
 

The Administrator can: 

¾

 

Set and modify all Passwords and security profiles 

¾

 

Fully access any computer 

¾

 

Use all functions 

 

The Supervisor can: 

¾

 

Fully access any computer 

¾

 

Scan computers 

 

There are 6 different Users in the SCOUTutp system. Each User has a Profile that defines the access 
level to different computers. There are 3 different access levels. These are: 

¾

 

Y – Full access to a particular computer 

¾

 

V –Viewing access only, to a particular computer (No keyboard/mouse functionality) 

¾

 

N – No access to a particular computer 

 
By default the User Profile Settings are full access.  
 
 

You can make the following changes:  

1. 

Edit the Logon and Passwords by choosing them from the 
Edit menu. See figures below.  

2. 

Make the desired changes. 

3. Click 

OK. 

 
 
 
 

Choose Settings from the Edit menu. The 
Computers’ Properties box appears. 
 
Here you can edit all the data that can be 
edited in the OSD.  
 
To edit a setting: 

1. 

In the Computer List, select the 
desired computer or group of 
computers. 

2. 

Make the desired changes. 

3. 

Check the Select box next to the changed setting. 

4. Click 

OK. 

5. 

To activate the changes press write configuration and then read configuration. 

 
 

 

RackAccess i Series 

14

 

User Guide