Toshiba e-STUDIO451c User Manual

June 2005 © TOSHIBA TEC

e-STUDIO281c/351c/451c ERROR CODE AND SELF-DIAGNOSTIC MODE

2 - 1

The following error codes is displayed at the upper right of the screen when the “CLEAR PAPER” or “CALL 

SERVICE” symbol is blinking.

E010

Paper exit jam

Jam not reaching the exit sensor : The paper which 

has passed through the fuser unit does not reach 

the exit sensor.

E020

Paper exit jam

Stop jam at the exit sensor: The trailing edge of the 

paper does not pass the exit sensor after its leading 

edge has reached this sensor.

E030

Other paper jam

Power-ON jam: The paper is remaining on the 

paper transport path when power is turned ON.

E061

Incorrect paper size setting for upper drawer: The 

size of paper in the 1st drawer differs from size set-

ting of the equipment.

E062

Incorrect paper size setting for lower drawer: The 

size of paper in the 2nd drawer differs from size set-

ting of the equipment.

E063

Incorrect paper size setting for PFP upper drawer: 

The size of paper in the 3rd drawer differs from size 

setting of the equipment.

E064

Incorrect paper size setting for PFP lower drawer: 

The size of paper in the 4th drawer differs from size 

setting of the equipment.

E065

Incorrect paper size setting for bypass tray: The 

size of paper in the bypass tray differs from size 

setting of the equipment.

E090

Image data delay jam: Image data to be printed 

cannot be prepared.