Toshiba e-STUDIO451c User Manual

June 2005 © TOSHIBA TEC

e-STUDIO281c/351c/451c ADJUSTMENT

3 - 35

The maximum text density of each color at Full Color Mode can be adjusted as follows.

<Adjustment Mode (05)>

Make a test copy and compare the image obtained with the current settings; if necessary, make adjust-
ment using the following procedure.

Be sure that this adjustment be made after performing “3.5.1 Automatic gamma adjustment”.

<Procedure>
Procedure is same as that of “3.5.3 Density adjustment”.

Text/Photo reproduction level at the Full color mode, Auto color mode and Gray scale mode can be 
adjusted.
Text/Photo reproduction level adjustment can be switched to "Photo oriented 1", "Photo oriented 2", 
"Text oriented 1" or "Text oriented 2" in the following codes.

<Adjustment Mode (05)>

• The text reproduction level is lower when the mode is switched from the default value to the 

Photo oriented 1 or Photo oriented 2. (The text reproduction level in Photo oriented 2 is lower 
than that in Photo oriented 1.)

• Changing the setting value from default value to the Text oriented 1 or Text oriented 2 causes 

image noise in the printed photo image with few lines per inch. (Photo oriented 2 causes more 
image noise than Photo oriented 1.)

Yellow

1630

Maximum text density The larger the value is, the darker the maximum text density 

of each color to be adjusted becomes.

Acceptable values: 0 to 10 (Default: 5)

Magenta

1631

Cyan

1632

Black

1633

1725

Text/Photo reproduc-

tion level adjustment

0: Default

1:  Photo oriented 2 (The printed image reproduction level 

higher than that of the Photo oriented 1)

2:  Photo oriented 1 (The printed image reproduction level 

higher than that of the Default)

3:  Equivalent to the Default

4:  Text oriented 1 (The text reproduction level higher than 

that of the Default)

5:  Text oriented 2 (The text reproduction level higher than 

that of the Text oriented 1)