Olivetti 150D User Manual
60
4
Gently install the TD cartridge. To install the TD cartridge, see
"INSTALLING THE TD CARTRIDGE" (p.10).
"INSTALLING THE TD CARTRIDGE" (p.10).
5
Close the front cover and then the side cover by pressing the
round projections near the side cover open button. The drum
replacement required (
round projections near the side cover open button. The drum
replacement required (
) indicator will go out and the start
(
) indicator will light up.
CLEANING THE UNIT
Proper care is essential in order to get clean, sharp copies. Be sure to take a few
minutes to regularly clean the unit.
minutes to regularly clean the unit.
Cabinet
Wipe the cabinet with a soft, clean cloth.
Original table and the back side of the original cover/SPF
Stains on the glass, scanning window, cover or SPF roller will also be copied. Wipe
the glass, scanning window, cover and SPF roller with a soft, clean cloth. If
necessary, dampen the cloth with a glass cleaner.
the glass, scanning window, cover and SPF roller with a soft, clean cloth. If
necessary, dampen the cloth with a glass cleaner.
When closing the covers, be sure to close the front cover securely and
then close the side cover. If the covers are closed in the wrong order, the
covers may be damaged.
then close the side cover. If the covers are closed in the wrong order, the
covers may be damaged.
• Before cleaning, be sure to turn the power switch off and remove the
power cord from the outlet.
• Do not use thinner, benzene or other volatile cleaning agents. Doing
so may cause deformation, discoloration, deterioration or malfunction.
Original table/scanning window
Original cover/SPF
SPF roller
Scanning window