AOC LM722 User Manual

英文 

15

 

 

 

 

Your system may not recognize your flat-panel monitor,and as a result, you 
may need to complete the following steps for optimum performance of your 
monitor.  

 

1.  Check this LCD MONITOR is properly connected to your computer. 
2.  Restart the computer , when win95/98 detects the presence of a Plug and 

Play Monitor ,its device driver can be loaded and configured dynamically, 
insert LCD Monitor install disk to DISK A after the Win95/98 setup wizard 
is appeared. This setup wizard will lead you through the steps for 
configuring the system. 
(Select “ NEXT “ for next steps and select driver A for LCD Monitor install 
file, if not select driver A ,the configuration system will automatically select 
the standard Plug and Play driver) 

3.  After the installation complete you can find the monitor complete name by 

following steps : 
Click “START” , select “SETTINGS”, select “CONTROL PANEL “Select 
“SYSTEM”, select “ DEVICE MANAGEMENT “, select  “MONITOR” icon 
and click twice ,you can see the description as follow : 
“AOC LM722 “ 

 

if this description doesn’t exist, or the “MONITOR” icon doesn’t exist 
too,that means your installation is not successful. 

 

Please delete the description with click the right button of mouse, and 
select The “remove or erase” to delete the description, if your step is 
successful, the “MONITOR “ icon will disappear. 

 

Please repeat this 2nd, 3rd steps if not success 

 

4.  After you complete above setup, please follow the steps below to operate 

your monitor at maximum performance : 
A). 

Double click on the My Computer icon 

B). 

Double click on the Control Panel icon 

C). 

Double click on the Display icon, click on the Settings tab 

D). In 

the Desktop Area drag  the slider  to  resolution 1280x1024, and 

set the Color palette for 16-bit color 

E). 

Click on the Advanced Properties  

F). Select 

the 

add-on card tab , set the refresh rate to 60 Hz, click the 

OK button, and click on the CLOSE button