JVC TM-H150CG User Manual

i

o

e

r

t

y

u

;

a

e

VIDEO A terminal
Input (IN) and output (OUT) terminals for composite
signals.

• The IN and OUT terminals are bridge-connected (auto

termination).

NOTE:
Use the AUDIO A terminals for the corresponding audio signals.

r

VIDEO B terminal
Input (IN) and output (OUT) terminals for composite
signals.

• The IN and OUT terminals are bridge-connected (auto

termination).

NOTE:
Use the AUDIO B terminals for the corresponding audio signals.

t

VIDEO B (Y/C IN, Y/C OUT) terminal
Input (IN) and output (OUT) terminals for Y/C (S-
video) signals.

• The Y/C IN and Y/C OUT terminals are bridge-connected

(auto termination).

NOTES:
• Use the AUDIO B terminals for the corresponding audio signals.
• When both an Y/C (S-video) signal and a composite signal are

input to the VIDEO B terminal, the Y/C signal has priority over
the composite signal.

y

AUDIO A terminal
Input (IN) and output (OUT) terminals for analog
audio signals.

• The IN and OUT terminals are bridge-connected (auto

termination).

NOTE:
Use the VIDEO A terminals for the corresponding video signals.

u

AUDIO B terminal
Input (IN) and output (OUT) terminals for analog
audio signals.

• The IN and OUT terminals are bridge-connected (auto

termination).

NOTE:
Use the VIDEO B terminals for the corresponding video signals.

i

Input card slot
When using the input card (not supplied), install the
card to this slot.

o

REMOTE (external control) terminal
Terminals for controlling the monitor by an external
control.

\ For details, see page 15.

;

Main power switch
Turns on and off the main power.

• I: ON

‡

: OFF

NOTE:
When turning on the main power, the power lamp lights up as
follows:
• Orange: The monitor is in stand-by mode.
• Green:

The monitor is on.

a

AC inlet
Connect the supplied AC power cord to this inlet
and an AC outlet (120 V AC/220 – 240 V AC, 50 Hz/
60 Hz).

[04-09]_TM-H150CG.p65

04.1.17, 4:05 PM

6