Kenwood DDX3070 User Manual

English

•  For removing DDX790/DDX770/DDX7070BT, 

☞

 page 80.

  Remove the trim plate by referring to 

the removal procedure in the section 
“Removing the Trim plate”.

  Insert the two extraction keys 6 deeply 

into the slots on each side, as shown.

Accessory 6

  Lower the extraction keys toward the 

bottom, and pull out the unit halfway 
while pressing towards the inside.

⁄

•  Be careful to avoid injury from the catch pins on 

the removal tool.

  Pull the unit all the way out with your 

hands, being careful not to drop it.

  Check the installation position of the 

microphone (accessory 9).

  Remove oil and other dirt from the 

installation surface.

  Install the microphone. 

  Wire the microphone cable up to the unit 

with it secured at several positions using 
tape or the like.

⁄

•  Install the microphone as far as possible from the 

mobile phone.

Fix a cable with clamps (commercially 
available).

Peel the release coated paper of double-face 
adhesive tape to fix on the place shown above.

Adjust the direction of the microphone to the driver.

Accessory 9

EN_GET0907-001A_KR.indb   85

12/11/13   10:14