Insignia NS-20EM50A13 User Manual

www.insigniaproducts.com

Congratulations on your purchase of this 
high-resolution multi-scan color monitor. This color 
monitor represents the state of the art in monitor 
design, and is designed for reliable and trouble-free 
performance. Please read this guide thoroughly 
before installation.

This monitor is manufactured and tested on the 
principle that a user’s safety comes first. However, 
improper use or installation may result in danger to 
the monitor as well as to the user. Carefully go over 
the following WARNINGS before installation and 
keep this guide handy.

• This monitor should be operated only at the 

correct power sources indicated on the label on 
the back of the monitor. If you’re unsure of the 
power supply in your residence, consult your local 
dealer or power company.

• Do not try to repair the monitor yourself as it 

contains no user serviceable parts. The monitor 
should only be repaired by a qualified technician.

• Do not remove the monitor cabinet. There are 

high-voltage parts inside that may cause electric 
shock to human bodies, even when the power 
cord is disconnected .

• Stop using the monitor if the cabinet is damaged. 

Have it checked by a service technician.

• Put your monitor only in a clean, dry environment. 

Unplug the monitor immediately if gets wet and 
consult your service technician.

• Always unplug the monitor before cleaning it. 

Clean the cabinet with a clean, dry cloth. Apply 
non-ammonia based cleaner onto the cloth, not 
directly onto the glass screen.

• Keep the monitor away from magnetic objects, 

motors, TV sets, and transformers.

• Do not place heavy objects on the cable or power 

cord.

• For PLUG CABLE EQUIPMENT, the outlet shall be 

installed near the equipment and shall be easily 
accessible.

• Due to safety concerns, if the VESA mounting kit is 

purchased separately, please make sure that the 
mounting kit is UL-Listed, and replaceable only by 
service personnel.

• 20” Widescreen LED monitor
• Power  cable
• VGA  cable
• Quick  Setup  Guide

Press to open the on screen display (OSD) menu and enter menu 
mode. Press again to exit the OSD and return to display mode.

In menu mode, press to scroll down or decrease settings in the OSD 
menus.
In normal operation, press to access the Contrast/Brightness/

Backlight menu.

In menu mode, press to scroll up or increase settings in the OSD 
menus.
In normal operation, press to access Color Vision mode.

In menu mode, press to confirm a selection or setting in the OSD 
menus.
In normal operation, press and hold for three seconds to auto adjust 
the image.
Press to enter the input select menu. You can choose VGA or DVI.

Turns blue when the monitor is on. Turns off when the monitor is 
turned off.

Press to turn the monitor on. Press again to turn the monitor off.

In normal operation, press simultaneously to reset contrast and 
backlight.

In normal operation, press simultaneously to lock/unlock the power 
button functionality. (So the monitor cannot be turned on or off 
with the Power button.)

In normal operation, press simultaneously to lock/unlock the MENU 

button functionality. (So you cannot access the OSD menus by 
pressing the MENU button.)

In normal operation, press simultaneously to switch between 
similar PC timings (for example 720 x 400 @70 Hz and 640 x 400 @ 
70 Hz).

Plug the AC power cord into this connector.

Plug an optional DVI connector into this jack.

Plug the VGA connector into this jack.

NS-20EM50A13_12-0349_MAN_V1_EN.book  Page 1  Wednesday, July 18, 2012  11:38 AM