Siig eSATA II PCIe Pro RAID SC-SAE312-S3 User Manual

1.

Turn OFF the power to your computer and any

other connected peripheral devices.

2.

Unplug the power cord from the back of the

computer.

3.

Remove your computer’s cover.

4.

Remove the slot bracket from an available PCI

Express slot.

5.

To install the card, carefully align the card's bus

connector with the selected PCI Express slot on the

motherboard. Push the board down firmly, but

gently, until it is well seated.

6.

Replace the slot bracket's holding screw to secure

the card.

7.

Replace the computer cover and reconnect the power

cord.

External Serial ATA hard disk drives should come with

their own accessories.  In most cases, you just need to

power up the external device and connect them to the

external ports.
The SATA II PCIe Pro RAID is a two channel Serial ATA

controller that supports two Serial ATA hard disk drives.

It is recommended to use identical drives for all RAID

configurations, however, it's possible to combine hard

drives of different sizes and makes.