iiyama AQ5311D BK User Manual
ENGLISH
F 1) Adjust the H-POSITION so that the left side of the picture frame will move to the left
edge of the display area.
NOTE
n When the left side of the picture frame moves apart from the left edge of the display area
during the COARSE adjustment, adjust steps 1) and 2).
n Another way to make the COARSE adjustment is to correct the vertical wavy lines in the
zebra pattern.
n The picture may flicker during the COARSE, H-POSITION and V-POSITION adjustment.
n In case the picture frame is bigger or smaller than the data display area after the COARSE
n In case the picture frame is bigger or smaller than the data display area after the COARSE
adjustment, repeat steps from
C.
2) Stretch the right side of the picture frame to the right edge of the display area by
adjusting the COARSE in IMAGE SET-UP.
C Select AUTO in IMAGE SET-UP and perform the Automatic set-up.
Or press the
and
Buttons at the same time when the Menu is not displayed.
(Direct adjustment)
D Adjust the image manually by following procedure below when the screen has a flicker or
blur, or the picture does not fit in the display area after performing the Automatic set-up.
E Adjust the V-POSITION so that the top and bottom of the picture frame will fit to the
display area.
OPERATING THE MONITOR 15