Siig CE-H20411-S1 User Manual
2
Figure 1: Rear Panel
Rear Panel
•
Connection LED: this LED will be lit when
proper RJ-45 In is established with another
transmitter/transceiver
•
Rotary Switch: adjust the 16-level equalization
switch according to the transmission distance of the
received HDMI signal. For 5.1ch/7.1ch audio output,
adjust from 0-to-7 (longest-to-shortest transmission
length). For stereo audio output, adjust from 8-to-
F (longest-to-shortest transmission length). It is
recommended to adjust from 7-to-0 or from F-to-8 to
find the optimal visual experience
•
RJ-45 In: connect from an upstream transmitter/
transceiver using a CAT5e cable
•
Audio Out: 3.5mm audio jack, plug in your local
stereo speakers here
•
HDMI Out: connect a local display here
•
RJ-45 Out: link to the next transceiver/receiver
(optional) or remote display via RJ45 adapter. The
two LEDs will be lit when the HDMI over CAT5e
Transceiver is powered up
•
Power Jack: plug in the 5V power adapter here
Layout
Connection
LED
Rotary
Switch
RJ-45
In
Audio
Out
HDMI
Out
RJ-45
Out
Power Jack
LED