Lorex Technology L20WD800 Series User Manual
112
Hard Drive Replacement - Appendix #11
New Hard Drive Format
The New Hard Drive MUST be formatted.
If a new HARD DRIVE is detected, the
system will prompt you to FORMAT the
drive. If you do not choose to format the
HARD DRIVE, the drive will not be
detected by the system.
system will prompt you to FORMAT the
drive. If you do not choose to format the
HARD DRIVE, the drive will not be
detected by the system.
If you choose to FORMAT a drive in this
way, the drive will no longer be readable by
a regular PC without using the HARD
DRIVE VIEWER software included on the
CD provided with this unit.
way, the drive will no longer be readable by
a regular PC without using the HARD
DRIVE VIEWER software included on the
CD provided with this unit.
NOTE: Do NOT turn off the System while the drive is formatting. This can cause problems with
the Hard Drive.
the Hard Drive.
The installation video is included with the Hard Drive that was pre installed with the System. If
you change the hard drive, the installation video will not longer work. You can view the
Installation Video using the included Software CD, or online at
you change the hard drive, the installation video will not longer work. You can view the
Installation Video using the included Software CD, or online at
http://www.lorexcctv.com/support
in the Installation Guide section.