Lg Electronics 47WV30-BAAM User Manual

IR Receiver

Picture ID is used to change the settings of a 
specific set (display) using a single IR receiver for 
multi-vision. The set receiving the IR signal com-
municates with another set via the RS232 connec-
tor. Each set is identified by a Set ID. If you as-
sign the Picture ID using the remote control, only 
displays with the same Picture ID and Set ID can 
be controlled remotely. 

1

 Press the ID On (Red) button on the remote con-

trol.

2

 If you press the left/right buttons or press the 

ON button repeatedly, the Picture ID cycles 

through OFF and 1 to 4.Assign the ID you 

want. 

 

y

If you assign the Set ID to each set with 
multi-vision, and then assign the Picture ID 
using the red button on the remote control, 
the key command is displayed for the set 
with the same Set ID and Picture ID. A set 
with different Set IDs and Picture IDs cannot 
be controlled by IR signals.

 

y

Refer to the Set ID on page 46 for assigning 
a Set ID.

 

y

The maximum value of the Picture ID can be 
set in the Total Set ID menu.

 

y

Please refer to the Installation Manual for 
more information on the assignment of a 
Total Set ID.









































 

y

For example, if the Picture ID is assigned 
to 2, the upper right display (Set ID: 2) can 
be controlled by IR signals. 

 

y

For each set, you can change the settings 
for the PICTURE, AUDIO, TIME, OPTION, 
NETWORK and MY MEDIA menus or the 
hot keys on the remote control. 

 

y

If you press the ID OFF (Green) button, 
the Picture IDs for all sets are turned off. If 
you then press any button on the remote 
control, all sets will start working again.

 

y

The Picture ID function may not work dur-
ing MY MEDIA operating.

NOTE

Picture ID

Close

             Off          

2X2 Multi-Vision (Total Set ID: 4)
Set IDs are assigned as shown in the picture. 

Picture ID

Close

           Off