Sharp PNE802 User Manual

15

E

Caution

•  Turn on the monitor first before turning on the PC or 

playback device.

Main power switch

Caution

•  The main power must be turned on/off with the main power 

switch. Do not connect/disconnect the power cord or turn 

the breaker on/off while the main power switch is on.

•  When switching the main power switch or the POWER 

button off and back on, always wait for at least 5 seconds.

•  For a complete electrical disconnection, pull out the main 

plug.

Press the POWER button or POWER switch to turn the power 

ON/OFF.

Power LED

Green lit

Power on

Orange lit

Power off (Standby mode)

Green flashing

Input signal waiting mode

Caution

•  When switching the main power switch or the POWER 

button off and back on, always wait for at least 5 seconds. 

A short interval may result in a malfunction.

TIPS

•  When the main power switch is off, the monitor cannot be 

turned on.

•  If the monitor is in the input signal standby mode and you 

press the POWER button on the remote control unit, the 

monitor enters standby mode.

•  Setting the SCHEDULE flashes the power LED alternately 

in red and orange in standby mode.

•  To disable the logo screen from displaying when turning 

the power ON, set LOGO SCREEN to OFF on the SETUP 

menu. (See page 22.)