Sharp PNL802BPKG2A User Manual

ADVANCED items (AV input) (See page 24

for additional Menu item details.)

FLESH TONE
Adjust the hue control.
3D-NR
Reduce the noise of playback images on video.

Setting a higher level reduces more noise. However, it may

cause blurring on an image.
MPEG-NR
Reduce block noise caused by digital compression.
3D-Y/C (AV VIDEO)
Specify whether to perform 3-dimension Y/C separation.

If dot interference or cross-color is occurring in fast-motion

scenes, selecting “OFF” may improve the image quality.
C.M.S.-HUE
Adjusts color tone with 6 colors of R (red), Y (yellow), G

(green), C (cyan), B (blue), and M (magenta).
C.M.S.-SATURATION
Adjusts color vividness with 6 colors of R (red), Y (yellow), G

(green), C (cyan), B (blue), and M (magenta).
C.M.S.-VALUE
Adjusts color brightness with 6 colors of R (red), Y (yellow),

G (green), C (cyan), B (blue), and M (magenta).

TIPS

• When FLESH TONE is set to LOW or HIGH, C.M.S.-HUE/

-SATURATION/-VALUE cannot be set.

Adjustments for PC screen display

Automatic adjustment

When you use the PC D-sub input terminal or PC RGB input

terminals to display a PC screen for the first time, or when

you change the setting of the PC, use the automatic screen

adjustment.

1. Switch the input to PC D-SUB or to PC RGB and display

the adjustment pattern. (See the description below.)

2. Press

and use

to display the SCREEN

menu.

3. Press

and select “AUTO”.

4. Press

The automatic adjustment is complete in several seconds.
5. Press

twice to close the menu screen.

TIPS

• If the screen cannot be adjusted properly with one

automatic adjustment, repeat the automatic adjustment two

or three times. Try manual adjustment if necessary.

Screen display for adjustment

Before making adjustments in the SCREEN menu or

PICTURE menu, display an image to brighten the entire

screen. If you are using a Windows PC, use the adjustment

pattern on the supplied CD-ROM.

Opening the adjustment pattern

The following example is performed in Windows 7.

1. Load the supplied CD-ROM into the computer’s CD-

ROM drive.

2. Open [CD Drive] in [Computer].

In Windows XP, open [CD Drive] in [My Computer].

3. Double-click [Adj_uty.exe] in the [Monitor] folder.

The adjustment pattern will appear.

Adjust the screen automatically or manually.

4. When adjustment is finished, press the [Esc] on the

computer’s keyboard to quit the adjustment program.

5. Eject the CD-ROM from the CD-ROM drive.

TIPS

• If the display mode on the computer you are using is

65,000 colors, the color levels in the color pattern may

appear differently or grayscale may appear to be colored.

(This is due to the specifications of the input signal and is

not a malfunction.)

Menu Items