Sharp PNL802BPKG2A User Manual

7

E

-  The TFT color LCD panel used in this monitor is made with 

the application of high precision technology. However, there 

may be minute points on the screen where pixels never light 

or are permanently lit. Also, if the screen is viewed from an 

acute angle there may be uneven colors or brightness. Please 

note that these are not malfunctions but common phenomena 

of LCDs and will not affect the performance of the monitor.

-  Do not display a still picture for a long period, as this could 

cause a residual image.

- Never rub or tap the monitor with hard objects.
-  Please understand that SHARP CORPORATION bears no 

responsibility for errors made during use by the customer or 

a third party, nor for any other malfunctions or damage to this 

product arising during use, except where indemnity liability is 

recognized under law.

-  This monitor and its accessories may be upgraded without 

advance notice.

-  Do not use the monitor where there is a lot of dust, where 

humidity is high, or where the monitor may come into contact 

with oil or steam, as this could lead to fire.

-  Ensure that the monitor does not come into contact with 

water or other fluids. Ensure that no objects such as paper 

clips or pins enter the monitor as this could lead to fire or 

electric shock.

-  Do not place the monitor on top of unstable objects or in 

unsafe places. Do not allow the monitor to receive strong 

shocks or to strongly vibrate. Causing the monitor to fall or 

topple over may damage it.

-  Do not use the monitor near heating equipment or in places 

where there is likelihood of high temperature, as this may 

lead to generation of excessive heat and outbreak of fire.

-  Do not use the monitor in places where it may be exposed to 

direct sunlight.

-  The AC outlet shall be installed near the equipment and shall 

be easily accessible.

-  Do not touch the screen while the PC is starting up, it will 

lead to a malfunction. When this occurs, restart the PC.

-  Do not operate the screen with a hard or pointed object such 

as a fingernail, pen, or pencil.

-  Two touch panels cannot be used when two displays are 

connected to the computer. 

Only the touch panel on the display that is set as the primary 

monitor will be operable.

-  If another USB device is connected to the computer to which 

the touch panel is connected, do not operate the USB device 

during touch panel input. Input may not take place correctly.

-  If two touch panels are used in close proximity to each other, 

use handwriting mode. The touch pens will interfere with 

each other and will not operate correctly.

-  If the reflective surface becomes dirty, malfunctioning may 

result. Use a soft cloth to gently wipe dirt off the reflective 

surface. 

When wiping the reflective surface, wipe from the sensor 

downward.

-  Do not use near devices that use infrared. 

Malfunctioning may result. Use the monitor away from other 

devices.

- Use only the power cord supplied with the monitor.
-  Do not damage the power cord nor place heavy objects on 

it, stretch it or over bend it. Also, do not add extension cords. 

Damage to the cord may result in fire or electric shock.

-  Do not use the power cord with a power tap. 

Adding an extension cord may lead to fire as a result of 

overheating.

-  Do not remove or insert the power plug with wet hands. 

Doing so could result in electric shock.

- Unplug the power cord if it is not used for a long time.
-  Do not attempt to repair the power cord if it is broken 

or malfunctioning. Refer the servicing to the service 

representative.

-  Microsoft, Windows, Windows Vista and Internet Explorer 

are registered trademarks of Microsoft Corporation.

-  HDMI, the HDMI Logo and High-Definition Multimedia 

Interface are trademarks or registered trademarks of HDMI 

Licensing LLC.

-  Adobe, Acrobat, and Reader are either registered trademarks 

or trademarks of Adobe Systems Incorporated in the United 

States and/or other countries.

-  Intel, Celeron, and Intel Core 2 Duo are trademarks or 

registered trademarks of Intel Corporation or its subsidiaries 

in the U.S.A. and other countries.

-  AMD, AMD Sempron, AMD Athlon, and combinations thereof 

are trademarks of Advanced Micro Devices, Inc.

-  This product comes with RICOH Bitmap Fonts produced and 

sold by RICOH COMPANY, LTD.

-  All other brand and product names are trademarks or 

registered trademarks of their respective holders.

-  Language of OSD menu used in this manual is English by 

way of example.

-  Illustrations in this manual may not exactly represent the 

actual product or display.

●  The LED backlight in this product has a limited lifetime.

  *  If the screen gets dark or does not turn on, it may be 

necessary to replace the LED backlight. This LED 

backlight is exclusive to this product and must be replaced 

by an authorized SHARP servicing dealer or service 

center.

  *  Please contact your local SHARP servicing dealer or 

service center for assistance.