LaCie 131081 User Manual

LaCie 324i LCD Monitor                                                                          

Getting Connected

User Manual                                                                                                         

page 16

2.1.5. Power Cable and Power Switch

1.  Connect the female end of the power cable to the monitor 

, a).

2.  Connect the male end of the power cable to a compatible 

electrical receptacle (

). For example, an electrical out-

let on the wall.

3.  Turn the Power Switch to the “l” position (

monitor can now be turned on using the Power Button on the 
front panel of the 324i (

To avoid potential electrical problems with your LaCie 324i moni-
tor, please pay close attention to the following:

 

✦

Only use the power cable supplied with your specific LaCie 
monitor. Do not use a power cable from another LaCie de-
vice or another manufacturer. Using any other power cable 
or power supply may cause damage to the device and void 
your warranty.

 

✦

Always remove the power cable before transporting your 
LaCie monitor. Failure to remove the power cable may re-
sult in damage to your monitor and will void your warranty.

 

✦

You may use your LaCie monitor when in a foreign country 
thanks to its 100-240 Volt power supply. To use this fea-
ture, you may need to purchase an appropriate adapter or 
cord. LaCie accepts no responsibility for any damage to the 
drive resulting from the use of an inappropriate adapter. 
Using an adapter other than one authorized by LaCie will 
void your warranty.

Fig. 06

Fig. 07

a

b