Sharp PN-A601 User Manual

15

E

1.  Press the cover gently and slide it in the direction of the

arrow.

2.  See the instructions in the compartment and put in the 

batteries (R-6 (“AA” size) x 2) with their plus (+) and minus

(-) sides oriented correctly.

3.  Close the cover.

TIPS

•  When the batteries become exhausted replace them with

new (commercially available) batteries.

•  The supplied batteries (R-6 (“AA” size) x 2) may become

exhausted quickly depending on how they are stored.

•  If you will not be using the remote control for a long time,

remove the batteries.

•  Use manganese or alkaline batteries only.

Use the remote control unit at a distance of approx. 16.4 feet (5

m) from the remote control sensor with an angle of approx.10°

from the center to the top/bottom/left/right of the sensor.

10º

10º

10º

10º

16.4 feet

(5 m)

Remote control

sensor

The operation range of the PN-ZR01 (optional) remote control

unit is approx. 23 feet (7 m) when aimed directly at the remote 

control sensor box. When used at an angle of approx 10° from

the center to the top/bottom/right/left of the remote control 

sensor, use it within a distance of approx 16.4 feet (5 m).

Remote control 

sensor

10º

10º

16.4 feet

(5 m)

16.4 feet

(5 m)

23.0 feet

(7 m)

TIPS

•  Do not expose the remote control unit to shock by dropping

or stepping on it. This could lead to a malfunction.

•  Do not expose the remote control unit to liquids, and do not

place it in an area with high humidity.

•  The remote control unit may not work properly if the remote

control sensor is under direct sunlight or strong lighting.

•  Objects between the remote control unit and the remote

control sensor may prevent proper operation.

•  Replace the batteries when they run low as this may

shorten the remote control’s operation range.

•  If a fluorescent light is illuminated near the remote control

unit, it may interfere with proper operation.

•  Do not use it with the remote control of other equipment

such as air conditioner, stereo components, etc.

•  Adjust the angle of the PN-ZR01 (optional) remote control

sensor and have it face the area where operation with the 

remote control unit will take place.