Sharp PN-A601 User Manual

18

E

Caution

•  Turn on the monitor first before turning on the PC or

playback device.

Caution

•  The main power must be turned on/off with the main power

switch. Do not connect/disconnect the power cord or turn

the breaker on/off while the main power switch is on.

•  When switching the main power switch or the POWER

button off and back on, always wait for at least 5 seconds.

•  For a complete electrical disconnection, pull out the main

plug.

Press the POWER button to turn the power ON/OFF.

When the main power switch is off, the monitor cannot be

turned on using the POWER button on the remote control unit.

Lit green

Power on

Lit orange

Power off (Standby mode)

Flashing green

Input signal waiting mode

Caution

•  When switching the main power switch or the POWER

button off and back on, always wait for at least 5 seconds.

A short interval may result in a malfunction.

TIPS

•  If the monitor is in the input signal standby mode and you

press the POWER button on the remote control unit, the

monitor enters standby mode.

•  You can turn on/off the monitor by pressing the power

switch on the front panel of the monitor.

•  Setting the SCHEDULE flashes the power LED alternately

in red and orange in standby mode.

•  To disable the logo screen from displaying when turning

the power ON, set LOGO SCREEN to OFF on the SETUP

menu. (See page 24.)

n

•  If the time has yet to be set when the monitor is first turned on,

the date/time setting screen appears. Set the date and time.

/

/

OK···[MENU] 

:

   

:

1.  Press

 , 

 , 

 or 

 to select the date and 

time, and press 

 or 

 to change the numerical 

values. 

2.  Press 

 or 

to select SET and then press

MENU

 .

•  Be sure to set the date and time.

•  The date/time setting screen will close automatically if no 

operation is performed for about 15 seconds. The date

and time can be set using DATE/TIME SETTING from the

OPTION menu when the date/time setting screen disappears.

TIPS

•

Set the date in “Month/Day/Year” order.

•

Set the time on a 12-hour basis.

•

The clock is maintained by the internal battery.

•

If you already set the time but the date/time setting 

screen appears when the power is turned on, the 

internal battery may be exhausted. Please contact 

your local Sharp servicing dealer or service center for 

assistance with battery replacement.

•

Estimated service life of the internal battery: About 5

years (depending on monitor operation)

•

The initial battery was inserted at the factory when the 

monitor was shipped, so it may run out of power before 

its expected operation life.

Power on/power off operations can be disabled in order to protect 

the monitor from an accidental power off. Set the ADJUSTMENT

LOCK in FUNCTION menu to “ON 2”. (See page 30.)