SMART Technologies 6055i/8055i SMP/8055ie-SMP User Manual

Attach the speakers and connect the speaker wires to the interactive flat panel before you

wall-mount it. For more information, see Installing the speakers on page 14.

Important mounting considerations for trained installers

Consider the following when mounting the interactive flat panel on a wall:

Plan your workflow to include cabling because some cable connection points might not be

accessible after installation.

Carry and lift the interactive flat panel by gripping the handles and sides.

To mount the interactive flat panel on a wall, you require a standard VESA 600 mm × 400 mm

compatible wall mount bracket (not included). The wall mount bracket must have minimum

depth of 14 mm to ensure sufficient space for the speakers.

Use M8 screws to fasten the wall bracket. The screws must be 14–15 mm long plus the

thickness of the bracket and the washer.

The recommended fasten force is 99.57–121.70 in-lb. (11.25–13.75 N·m).

Refer to the instructions included with the mounting equipment for more detailed information.

Choosing a mounting location

Consider the following when you select a location for the interactive flat panel:

The wall must be strong enough to support the interactive flat panel and the mounting

equipment. The interactive flat panel weighs 98 lb. (44.5 kg).

Do not install the interactive flat panel in a location where a door or gate could hit it.

C H A P T E R 2

Installing your interactive flat panel