Sony GDM-F400 User Manual
13
EN
Sony GDM-F400/F500 (E,F,S,C2) 3-864-156-22 (1)
Adjusting the quality of the picture
(SCREEN)
(SCREEN)
The SCREEN settings allow you to adjust the quality of the
picture by controlling the convergence, moire, and landing.
• If you see red or blue shadows around letters or lines, adjust the
picture by controlling the convergence, moire, and landing.
• If you see red or blue shadows around letters or lines, adjust the
convergence.
• If elliptical or wavy patterns appear on the screen, cancel the
moire.
• If the color is irregular at the corners of the screen, adjust the
landing.
The CANCEL MOIRE and MOIRE ADJUST settings are stored
in memory for the current input signal. All other settings are
stored in memory for all input signals.
in memory for the current input signal. All other settings are
stored in memory for all input signals.
1
Press the joystick.
The main MENU appears on the screen.
2
Move the joystick to highlight
SCREEN and
press the joystick again.
The SCREEN menu appears on the screen.
3
First move the joystick up or down to select the
desired adjustment item. Then move the joystick left
or right to make the adjustment.
desired adjustment item. Then move the joystick left
or right to make the adjustment.
* Moire is a type of natural interference which produces soft, wavy lines
on your screen. It may appear due to interference between the pattern
of the picture on the screen and the phosphor pitch pattern of the
monitor.
of the picture on the screen and the phosphor pitch pattern of the
monitor.
Note
The picture may become fuzzy when CANCEL MOIRE is set to ON.
Select
To
H CONVERGENCE
horizontally shift red or blue shadows
V CONVERGENCE
vertically shift red or blue shadows
TOP
V CONVER TOP
vertically shift red or blue shadows at
the top of the screen
the top of the screen
BOT
V CONVER BOT
vertically shift red or blue shadows at
the bottom of the screen
the bottom of the screen
LANDING
select one of the four corners of the
screen
screen
ADJ
LANDING ADJUST
reduce any irregularities in the color
of the corner selected in LANDING
to a minimum
of the corner selected in LANDING
to a minimum
:top left
:bottom left
:top right
:bottom right
CANCEL MOIRE
*
turn the moire cancellation function
ON or OFF
ON or OFF
ADJ (MOIRE ADJUST) appears
in the menu when you select ON
ADJ
MOIRE ADJUST
adjust the degree of moire
cancellation until the moire is at a
minimum
cancellation until the moire is at a
minimum
Select
To
Example of moire
GDM-F500.book Page 13 Friday, December 4, 1998 3:55 PM