Sony FWD-42B2 User Manual

 GB

For the setting method, see “Overview of the Menus”  (page 22).

If no signal is being input, “Aspect” and “Adjust Screen” cannot be set.

Allows you to make settings for connecting multiple displays to form a video wall.

• During video input, “Multi Display” displays a picture as close as possible to the 

current “Aspect” setting. But during PC input, it displays with “Aspect” set to “Full 
2”.

• When “Position” is set to the right-bottom, the 1 indicator lights up even if “LED” is 

set to “Off”. The indicator also lights up even when the display is off (standby), errors 
are detected, or the display is in sleep mode including the case of no signal or 
unsupported signal.

• “Multi Display” function cannot be used for 480i, 576i,1080/50i, 1080/60i or 1080/

24psf signal.

Multi Display

Do settings to form a video wall.

Off

Uses a single screen.

2×2
3×3
4×4

Settings to connect 2, 3 or 4 displays both vertically and horizontally.

1×2
1×3
1×4

Settings to connect 2, 3 or 4 displays horizontally.

2×1
3×1
4×1

Settings to connect 2, 3 or 4 displays vertically.

Position

Settings for the screen position of each display.

Output Format

You can select a picture output format. The picture position is automatically adjusted, 
and you can get a suitable picture output.

Tiles

Shows full signal on each screen.

Window

Shows one large picture with multi display naturally. Part of the signal will go behind the 
bezel area.

LED

Select “On” or “Off”. If you select “On”, the 1 indicator on the front panel (page 10) to 
be continually turned on.