Sony SDM-G76D User Manual

8 

(GB)

With the monitor and computer switched off, first connect the 
power cord to the monitor, then connect it to a power outlet.

Bundle the cables and cords.
Using the supplied cord strap, bundle the cables and cords.

Press the 1 (power) switch.
The 1 (power) indicator of the monitor lights up in green.

The installation of your monitor is complete. If necessary, use the 
monitor’s controls to adjust the picture.

• If no picture appears on your screen

Check that the power cord and the video signal cable are 
properly connected.

• If NO INPUT SIGNAL appears on the screen:

The computer is in the power saving mode. Try pressing any 
key on the keyboard or moving the mouse.

• If CABLE DISCONNECTED appears on the screen:

Check that the video signal cable is properly connected.

• If OUT OF RANGE appears on the screen:

Reconnect the old monitor. Then adjust the computer’s 
graphics board within the following ranges.

For more information about the on-screen messages, see “Trouble 
symptoms and remedies” on page 20.

to AC IN

to a power outlet

power cord (supplied)

Cord strap (supplied)

The illustration of the back of the monitor shown here 
is that of the SDM-G76D.
The same applies for the other models.

28–80 kHz
(SDM-G76D/SDM-
G96D)
28–81 kHz
(SDM-G206W)

28–64 kHz
(SDM-G76D/SDM-
G96D)
28–66 kHz
(SDM-G206W)

56–75 Hz
(SDM-G76D/SDM-
G96D)
56–75 Hz (<1680 

×  

1050)
56–60 Hz (=1680 

×  

1050) 
(SDM-G206W)

60 Hz
(SDM-G76D/SDM-
G96D)
60 Hz
(SDM-G206W)

1280 

×  1024 or less

(SDM-G76D/SDM-
G96D)
1680 

×  1050 or less

(SDM-G206W)

1280 

×  1024 or less

(SDM-G76D/SDM-
G96D)
1680 

×  1050 or less

(SDM-G206W)