Acer 2400 User Manual

Chapter 2

37

The table below describes the parameters in this screen. Settings in boldface are the default and suggested 
parameter settings.

NOTE: You can also enable Acer disc-to-disc system recovery via Alt+F10 during POST.

Date and Time

The hours are displayed with 12 hour format. The 
values setin these two fields take effect 
immediately.

Quiet Boot

Determines if the system will display customer 
logo and summary screen or not.
Enable: Customer logo is displayed, and 
summary screen is disabled.
Disabled: Custoemr logo is not displayed, and 
summary screen is enabled.

Option: 

 or Disabled

Power on display

Auto: During power process, the system will 
detect if any display device is connected on 
external video port. If any external display device 
is connected, the power on display will be in CRT 
(or projector) only mode. Otherwise it will be in 
LCD only mode.
Both: Simultaneously enable both the integrated 
LCD screen and the system’s external video port 
(for an external CRT or projector).

Option: 

 or Both

LCD Auto Dim

Determines if the system will automatically dim 
the LCD brightness in order to save power when 
AC is not present.
The system will support an automatic dimming of 
the LCD backlight when the AC power is NOT 
available (running on battery power).

Option: 

 or Disabled

Network Boot

Enables, disables the system boot from LAN 
(remote server).

Option: 

 or Disabled

F12 Boot Menu

Enables, disables Boot Menu during POST.

Option: 

 or Enabled

D2D Recovery

Enables, disables D2D Recovery function. The 
function allows the user to create a hidden 
partition on hard disc drive to store operation 
system and restore the system to factory 
defaults.

Option: 

 or Disabled