Preh MC15T5 User Manual

13 

subject to change without prior notice 

05.2004 

 

Preh KeyTec GmbH, www.preh-keytec.com 

 

Press the + button to restore Volume, OSD V-Position, OSD H-Position, V-Position, H-
Position, Phase, Brightness, Clock to factory default. 

 

 

 
The LCD position on a VESA Mount Preh Touch / Screen Commander cannot be changed 
directly at the Product. The adjustment (tilting or swinging) of the Touch Screen 
Commander depends on the pole or wall mount hardware used. 
 
The LCD of the Preh Touch / Screen Commander is swingable and tillable. According to 
the usage the LCD position can be changed. 
The below picture shows the model with the multimedia base. 

 

Pict. 8: adjusting screws on rear side 

 
The infinitely variable adjustment of the tilting force can be made with two adjusting screws 
located on the rear of the monitor. The adjustment torque (1 - 8 Nm) should be  about the 
same on both screws. 

 

Pict. 9: adjusting screws below 

 
The infinitely variable adjustment of the swinging force can be made with two adjusting 
screws in the base of the monitor. The adjustment torque (1 - 8 Nm) should be about the 
same on both screws.