Planar PT1814NUV User Manual
Chapter 1
5
3. Make sure the signal cable is secure to both the monitor and PC. Tighten the connecting screws to ensure a
secure connection.
If both analog (15-pin D-sub VGA) and digital (24-pin DVI) input ports are connected at the same time,
the signal input can be selected with the OSD (On-Screen Display) menu. Please go to the next chapter
for details.
the signal input can be selected with the OSD (On-Screen Display) menu. Please go to the next chapter
for details.
Connecting the Stereo Speakers
Please refer to the following instructions for connecting the LCD Monitor’s stereo speakers.
1. Connect the 1.5M audio cable to the Line-OUT of your PC’s audio card.
2. Connect the opposite end of the 1.5M audio cable to the LCD Monitor’s line-IN connector.
3. You can adjust the sound volume of the stereo speakers by using the speaker volume control function on the
OSD (On-Screen Display). Please refer to the next chapter for details.
Connecting the Optional Touch Screen
Your LCD Monitor has an optional touch screen feature. If your LCD monitor has this feature, connect the LCD
Monitor’s PS/2 connector to your PC’s 9-pin RS232 serial port to enable the touch screen.
Monitor’s PS/2 connector to your PC’s 9-pin RS232 serial port to enable the touch screen.
1. Connect the PS/2 connector end of the PS/2 to RS232 cable provided with the optional touch screen package
to the PS/2 Mini-Din port at the back of the LCD Monitor.