Polycom 4000 User Manual
RealPresence Collaboration Server (RMX) 1500/1800/2000/4000 Administrator’s Guide
Polycom®, Inc.
935
To enable secure communications mode:
1 In the Collaboration Server Management pane, click IP Network Services.
2 In the IP Network Services list pane, double-click the Management Network entry.
3 Click the Security tab.
2 In the IP Network Services list pane, double-click the Management Network entry.
3 Click the Security tab.
The Management Security Properties dialog box is displayed.
4 Select the Secured Communication check box.
5 Select the Certificate Validation mode by checking or clearing the Skip certificate validation for user
5 Select the Certificate Validation mode by checking or clearing the Skip certificate validation for user
logging session field as set out in the following table:
Management Network Properties - Certificate Validation Mode
Field: Skip certificate validation for user logging session
Status
RMX and Client Certificate Requirements
Un-checked
(Restricted Mode)
(Restricted Mode)
•
The RMX must install a personal certificate issued by a CA.
•
The Client must install a personal certificate issued by a CA.
•
The public key of the CA must be installed in the RMX.
Note: When the RMX Manager is the Client, all Personal Certificates
in the workstation's Certification Repository are sent to the RMX.
When using the RMX Web Client, Internet Explorer gives the user the
option to select the Personal Certificate to be used from the
workstation's Certification Repository.
in the workstation's Certification Repository are sent to the RMX.
When using the RMX Web Client, Internet Explorer gives the user the
option to select the Personal Certificate to be used from the
workstation's Certification Repository.