Planar VS15XAD User Manual

Operations Manual (OM705-00) 

 

OSD Lock 
The monitor incorporates an OSD lockout function.  Pressing the three controls 
Function select down   ,  Adjust   , Adjust   [Buttons 2, 3, 4] 
simultaneously will lock out the OSD.  Monitor settings cannot be altered at this 
point, but navigation through the OSD menus is possible.  An “OSD” lock is 
displayed at the bottom of the OSD menu.  To unlock the OSD, press the same 
three controls in the same manner as locking the OSD.  

 

 

The monitor can be changed from Analog Mode to Digital mode or from Digital 
Mode to Analog Mode as follows: 

 

1.  Ensure monitor power is “on” (steady or blinking power LED below OSD 

buttons). 

 

2.  Disconnect video cable from the monitor. The display will indicate “No 

video” 

 

 

 

 

 

 

3.  Wait for the “no video” message to disappear. 

 

4. Push 

the   and      buttons simultaneously. This creates a change in the 

DDC file and one of the following messages should appear. 

 

 

 

 

The message on the left indicates a change from Analog to Digital mode. The 
message on the right indicates a change from Digital to Analog mode. 

 

5.  Plug the video cable into the monitor.  The monitor should be displaying the 

supplied video input.