Planar ND1750 User Manual

 

5 

Alternate Mounting Solutions 
 
Detaching Network Display from Its Stand

 

Unscrew screws n the swivel base support column and 
pull downo the hinge to release. 

   

 
Interface for Arm/ Wall Mount Applications 

Before installing to mounting device, please refer to Fig.1-3. 
The rear of this LCD display has four integrated 4 mm, 0.7 pitch 
threaded nuts, as well as four 5 mm access holes in the plastic covering 
as illustrated in Figure 1-4. These specifications meet the VESA Flat 
Panel Monitor Physical Mounting Interface Standard (paragraphs 2.1 
and 2.1.3, version 1, dated 13 November 1997). 
 
Note:    M4mm x 11mm (L) screws should be used for a 3mm thick 
mounting plate application.    Thicker plates should use 
appropriately longer screws.    The screw threads should extend 
between 8 and 10 mm beyond the display surface of the mounting 
plate.    Follow the mounting device manufacturer’s 
reccomendations.   

 
 

Figure 1-4 

 
Connecting the Display to Your Network

 

1. 

Make sure the AC Power Cord is disconnected 

2. 

Connect one end of the Ethernet cable to the Network Display’s 
Ethernet (ENET) port. (See Fig 1-5)   

3. 

Verify that the other end of the Ethernet cable is connected to 
your LAN/WAN network. 

4. 

Make sure connections are secure and that the Ethernet 
connectors have  “clicked” into place.

 

 

 

Figure1-5

 

Figure 1-3