Panasonic BT-4LH310 User Manual

24

25

The underlined values are the factory defaults.

OFF 

*

1

ON

Selects whether to enable or disable the marker setting.

OFF

ON

Displays the aspect 1 marker.

[OFF]   Not displayed

[ON]    Displayed

ASPECT1 RATIO 17:9

16:9

Sets the ratio of marker 1.

[17:9]   17:9

[16:9]   16:9

*

17:9

16:9

4:3

13:9

14:9

CNSCO 2.39

CNSCO 2.35

2:1

VISTA

Selects/displays the marker type for when ASPECT1 RATIO is 17:9.

[17:9]               17:9 marker

[16:9]               16:9 marker

[4:3]                 4:3 marker

[13:9]               13:9 marker

[14:9]               14:9 marker

[CNSCO 2.39]   2.39:1 marker

[CNSCO 2.35]   2.35:1 marker

[2:1]                 2:1 marker

[VISTA]            VISTA marker

*

16:9

4:3

13:9

14:9

CNSCO 2.39

CNSCO 2.35

2:1

VISTA

Selects/displays the marker type for when ASPECT1 RATIO is 16:9.

• For each item, refer to ASPECT1 MODE(17:9).

*

OFF

95%

93%

90%

88%

80%

USER   85%

VAR. H. 85% V. 85%

DOT hhhh xxxx

LINE vvvv yyyy

Selects/displays the area marker type of the marker set in ASPECT1 RATIO.

[OFF]             No marker display

[95%]             95 % area marker

[93%]              93 % area marker

[90%]             90 % area marker

[88%]              88 % area marker

[80%]             80 % area marker

[USER]           An area marker that is adjustable in 1 % increments within 

the range of 80 % to 100 %. (The factory default is 85 %.) 

*

3

[VAR.]             An area marker that is adjustable in 1 % increments within the 

range of 80 % to 100 % separately for vertical and horizontal. 

(The factory default is 85 % for both vertical and horizontal.) 

*

3

[DOT]/[LINE]    An area marker that can be moved in increments of 1 dot/1 

line within the 0000 to 4094 range variable in the H direction 

(hhhh/xxxx) and the 0000 to 2158 range variable in the V 

direction (vvvv/yyyy).  

Select DOT or LINE, and then set each of the beginning and 

end. The value in the H direction is variable when DOT is 

selected, and the value in the V direction is variable when 

LINE is selected. (The factory defaults are DOT: 0000/4094 

and LINE: 0000/2158.)

OFF

ON

Displays the aspect 2 marker.

• For each item, refer to ASPECT1.

ASPECT2 RATIO 17:9

16:9

Sets the ratio of marker 2.

• For each item, refer to ASPECT1 RATIO.

*

1

  When a marker related control signal is received during REMOTE operation, this setting becomes [ON]. 

*

2

  An aspect marker is not displayed if ASPECT1 MODE is 17:9 when 17:9 is selected for ASPECT RATIO. (Only the area marker will 

be displayed.)

*

3

  Since video is displayed at 100 %, markers are not displayed if the marker setting is set to [100%].

*

4

  Displayed when the marker type set in ASPECT1 RATIO/ASPECT2 RATIO is 17:9, 16:9, or 4:3.

(Continued on next page)