Panasonic BT-4LH310 User Manual

28

29

The underlined values are factory defaults.

*

2.20

2.35

2.40

2.60

FILM

1.00 to 3.00 

(MANUAL SET)

Selects the gamma curve.

[2.20]                                 Identical to STANDARD of BT-LH Series

[2.35]                                 Identical to STDIO/PST of BT-LH Series

[2.40]                                 CRT approximation mode

[2.60]                                 Identical to CINEMA of BT-LH Series

[FILM]                                Film mode

[1.00 to 3.00(MANUAL SET)]      The gamma curve can be arbitrary changed in 

increments of 0.05.

• When [FILM] is selected, the 

 mark is displayed for the operating status.

• The gamma curve setting is reflected for the video not while the setting item is 

being changed but after the change has been confirmed.

VARICAM

OTHER

USER1

USER2

USER3

Selects the FILM gamma mode type.

[VARICAM]                       For VARICAM

[OTHER]                          Other

[USER1/USER2/USER3]      Allows you to select a user-defined value. (Factory 

default setting: VARICAM)

• For details on user downloads, refer to the user customization function. (→page

72)

Input Level

(Gumma curve image)

VARICAM

OTHER

Brightness

Video Gamma

USER 0 to 63 

*

2

D93

D65

D63

D60

D56

CINEMA

VAR1 

*

3

VAR2 

*

3

VAR3 

*

3

Selects the color temperature.

[USER 0 to 63]   Setting adjustable within the range of 0 to 63 (equivalent to a 

color temperature range of 3 000 K to 9 300 K)

[D93]               Equivalent to a color temperature of 9 300 K

[D65]               Equivalent to a color temperature of 6 500 K

[D63]               Equivalent to a color temperature of 6 300 K

[D60]               Equivalent to a color temperature of 6 000 K

[D56]               Equivalent to a color temperature of 5 600 K

[CINEMA]          Equivalent to the x: 0.314 and y: 0.351 values in the CIE 

chromaticity coordinates.

[VAR1]             WB (WHITE BALANCE) adjustment mode

[VAR2]             WB (WHITE BALANCE) adjustment mode

[VAR3]             WB (WHITE BALANCE) adjustment mode

USER 0 to 63 

D93

D65

D63

D60

D56

CINEMA

Selecting [VAR1] to [VAR3] in [COLOR TEMP.] allows you to adjust WHITE 

BALANCE VAR1 to VAR3.

*

1

 

This is grayed out when the same item is set for GPI and [GPI CONTROL] is set to [ENABLE].

*

2

 

To select [USER 0 to 63]

(1) Press the rotary knob <PICTURE>.

(2) Use the rotary knob <PICTURE> to select 0 to 63 and press the rotary knob <PICTURE>.

*

3

 

If [VAR1], [VAR2], or [VAR3] is selected, the mode becomes WB adjustment mode.