Panasonic BT-4LH310 User Manual

72

73

 

„

Utility software that supports this function is available from the Panasonic website. For details, see the Panasonic website (http://pro-

av.panasonic.net). This software allows you to write to the user areas in FilmGamma and ColorSpace and perform calibration adjust-

ments.

When the unit settings are set as follows, user defined values will be set.

The underlined values are the factory defaults.

FILM

Selects the gamma curve.

[FILM]  Film mode
• When [FILM] is selected, the 

 mark is displayed for the operating status.

VARICAM

OTHER

USER1-3

Selects the FILM gamma mode type.

[VARICAM]   For VARICAM use          [OTHER]    For other cameras

[USER1/USER2/USER3]  User download items

Three user defined values can be registered as shown below.

To register user defined values, use the FilmGammaSoftware utility software.

RS-232C

For how to install and operate the software, refer to the operating instructions of the software.

User defined values can be set when setting the following settings.

USER1-3

Reproduces colors in accordance with the set COLOR SPACE using the 3D LUT (look 

up table).

[USER1/USER2/USER3] Allows you to select a user setting value.

Three user defined values can be registered as shown below.

To register user defined values, use the LUTSoftware utility software.

RS-232C

For how to install and operate the software, refer to the operating instructions of the software.