Panasonic BT-3DL2550E User Manual
16
Power Supply
1. Connect the power cable to the AC inlet of the
AC adapter.
Use the supplied screw (for securing power cable)
and the power cable hook to secure the power cable
to the AC adapter.
and the power cable hook to secure the power cable
to the AC adapter.
2. Slide the supplied DC cable into the DC OUT
terminal on the AC adapter until it is locked in
place.
place.
3. Slide the DC cable into the DC IN terminal on the
unit until it locks in place.
4. Connect the power cable to an AC outlet.
5. Turn on the POWER switch. The POWER LED
lights green.
Connecting the power cable
Power cable hook
Screw
Power cable
Be sure to use the supplied AC adapter.
Do not use the supplied AC adapter for powering
other devices.
other devices.
The AC adapter generates heat during use, which is
normal and not a cause for concern.
normal and not a cause for concern.
Pin number
Signal
1
GND
2
+5 V
3
+24 V
4
+24 V
DC IN terminal
1
2
3
4
BT-3DL2550PE(VQT2U10)_E.book 16 ページ ２０１０年７月８日 木曜日 午後２時１２分